ICP Electronics ROCKY-3786EV User Manual page 37

Quick Power On Self Test
This category speeds up Power On Self Test (POST) after the
user power up the computer. If it is set to Enable, BIOS will
shorten or skip some check items during POST.
Enabled Enable quick POST
Disabled Normal POST
LAN ( CN17/UP) BootROM
Enabled/Disabled LAN BootROM
First/Second/Third/Other Boot Device
The BIOS attempts to load the operating system from the
devices in the sequence selected in these items.
The Choice: Floppy, LS120, HDD0-3, SCSI, CDROM, ZIP 100 ,
LAN, Disabled.
Swap Floppy Drive
If the system has two floppy drives, the user can swap the
logical drive name assignments.
The Choice: Enabled/Disabled.
Boot Up Floppy Seek
Seeks disk drives during boot up. Disabling speeds boot up.
The Choice: Enabled/Disabled.
Boot Up NumLock Status
Select power on state for NumLock.
The Choice: On/Off.
Gate A20 Option
Select if chipset or keyboard controller should control GateA20.
Normal A pin in the keyboard controller controls
GateA20
Fast Lets chipset control GateA20
37