Exit Selecting - ICP Electronics ROCKY-3732EVS Manual

entry to Setup. If set to "Setup", prompting only occurs when trying to
enter Setup.

4.15 Exit Selecting

Save & Exit Setup
Pressing <Enter> on this item asks for confirmation:
Save to CMOS and EXIT (Y/N)? Y
Pressing "Y" stores the selections made in the menus in
CMOS – a special section of memory that stays on after you
turn your system off. The next time you boot your computer,
the BIOS configures your system according to the Setup
selections stored in CMOS. After saving the values the system
is restarted again.
Exit Without Saving
Pressing <Enter> on this item asks for confirmation:
Quit without saving (Y/N)? Y
This allows you to exit Setup without storing in CMOS any
change. The previous selections remain in effect. This exits
the Setup utility and restarts your computer.
55