Using Setup - ICP Electronics ROCKY-3786EV User Manual

4.3 Using Setup

In general, the user can use the arrow keys to highlight items,
press <Enter> to select, use the PageUp and PageDown keys to
change entries, press <F1> for help and press <Esc> to quit.
The following table provides more details about how to navigate
in the Setup program using the keyboard.
Key
Up Arrow
Down
Arrow
Left Arrow
Right Arrow
Esc
Move Enter
PgUp key
PgDn key
+ key
- key
Esc key
F1 key
F5 key
F6 key
F7 key
F10 key
Move to the previous item
Move to the next item
Move to the item on the left (menu bar)
Move to the item on the right (menu bar)
Main Menu: Quit without saving changes
Submenus: Exit Current page to the next higher
level menu
Move to the item the user desired
Increase the numeric value or make changes
Decrease the numeric value or make changes
Increase the numeric value or make changes
Decrease the numeric value or make changes
Main Menu -- Quit and save no changes into CMOS
Status Page Setup Menu and Option Page Setup
Menu -- Exit current page and return to Main Menu
General help on Setup navigation keys
Load previous values from CMOS
Load the fail-safe defaults from BIOS default table
Load the optimized defaults
Save all the CMOS changes and exit
Function
27