Pnp/Pci Configuration Setup - ICP Electronics ROCKY-3786EV User Manual

4.10 PnP/PCI Configuration Setup

This section describes configuring the PCI bus system. PCI, or
Personal Computer Interconnect, is a system which allows I/O
devices to operate at speeds nearing the speed the CPU itself
uses when communicating with its own special components.
This section covers some very technical items and it is strongly
recommended that only experienced users should make any
changes to the default settings.
CMOS Setup Utility – Copyright © 1984-2000 Award
PNP OS Installed
Reset Configuration Data
Resources Controlled By
x IRQ Resources
x DMA Resources
PCI/VGA Palette Snoop
PCI Latency Timer(CLK)
↑↓←→Move Enter: Select +/-/PU/PD: Value F10:Save ESC: Exit
F1:General Help
F5:Previous Values
Defaults
Software
PnP/PCI Configurations
NO
Disabled
Auto(ESCD)
Press Enter
Press Enter
Disabled
32
F6:Fail-safe defaults
Item Help
------------------------
Menu Level
Default is Disabled.
Select Enabled to
reset Extended
System Configuration
Data(ESCD) when the
user exit Setup if the
user have installed a
new add-on and the
system
reconfiguration has
caused such a serious
conflict that the OS
cannot boot
F7:Optimized
50