1. Manuals
  2. Brands
  3. ICP Electronics Manuals
  4. Motherboard
  5. ROCKY - 058HV
  6. Manual

ICP Electronics ROCKY – 058HV Manual

Pentium & vga sbc
Hide thumbs
Table of Contents

Advertisement

Quick Links

ROCKY – 058HV
Pentium® & VGA SBC
Ver 3.0
@Copyright 1999
All Rights Reserved.
Manual second edition April.1, 2000
The information in this document is subject to change without prior
notice in order to improve reliability, design and function and does not
represent a commitment on the part of the manufacturer.
In no event will the manufacturer be liable for direct, indirect, special,
incidental, or consequential damages arising out of the use or inability
to use the product or documentation, even if advised of the possibility
of such damages.
This document contains proprietary information protected by copyright.
All rights are reserved. No part of this manual may be reproduced by
any mechanical, electronic, or other means in any form without prior
written permission of the manufacturer.
Trademarks
ROCKY-058HV is registered trademarks of ICP Electronics Inc., IBM
PC is a registered trademark of International Business Machines
Corporation. Intel is a registered trademark of Intel Corporation. Other
product names mentioned herein are used for identification purposes
only and may be trademarks and/or registered trademarks of their
respective companies.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ROCKY – 058HV and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for ICP Electronics ROCKY – 058HV

Summary of Contents for ICP Electronics ROCKY – 058HV

  • Page 1 Trademarks ROCKY-058HV is registered trademarks of ICP Electronics Inc., IBM PC is a registered trademark of International Business Machines Corporation. Intel is a registered trademark of Intel Corporation. Other...

  • Page 3: Table Of Contents

    Contents 1. Introduction ............3 Specifications ................4 What You Have ................5 2. Installation.............6 ROCKY-P058HV ................. 7 Setting the CPU of ROCKY-P058HV..........8 System Memory DRAM.............. 10 Watch-Dog Timer ..............10 DiskOnChip™ Flash Disk ............10 Clear CMOS Setup ..............11 System Memory Address Information ........
  • Page 4 USB Port Connector ..............17 IrDA Infrared Interface Port ............17 VGA Connector ................. 17 3.10 Fan Connector................18 3.11 External Power Connector............18 4. AWARD BIOS Setup ..........19 Getting Start ................19 Standard CMOS Setup .............. 20 BIOS Features Setup ..............22 Chipset Features Setup..............

  • Page 5: Introduction

    Introduction Welcome to the ROCKY-058HV Pentium® w/ VGA Single Board Computer. The ROCKY-058HV board is an ISA bus form factor board, which equipped with high performance Pentium® CPU and advanced high performance multi-mode I/O, designed for the system manufacturers, integrators, or VARs that want to provide all the performance, reliability, and quality at a reasonable price.

  • Page 6: Specifications

    1.1 Specifications : The ROCKY-058HV Pentium w/ VGA Single Board Computer provides the following specifications: • CPU : Pentium® MMX up to 233Mhz, AMD K5/K6/K6-2/K6-3 processor up to 400Mhz, Cyrix 6x86MX processor • Bus Interfac e : ISA bus • Bus Sp eed : ISA 8MHz •...

  • Page 7: What You Have

    • Bi-directional Parallel Port : Configurable to LPT1, LPT2, LPT3 or disabled. Supports EPP/ECP/SPP • IrDA port : Supports Serial Infrared(SIR) and Amplitude Shift Keyed IR(ASKIR) interface. • USB port : Supports USB port for future expansion. • Watch-dog timer : can be set by 1~255 seconds period. Reset or NMI is generated when CPU does not periodically trigger the timer.

  • Page 8: Installation

    Installation This chapter describes how to install the ROCKY-058HV. At first, the layout of ROCKY-058HV is shown, and the unpacking information that you should be careful is described. The jumpers and switches setting for the ROCKY-058HV's configuration, such as CPU type selection, system clock setting, and watch dog timer are also included.

  • Page 9: Rocky-P058Hv

    2.1 ROCKY-058HV's Layout...

  • Page 10: Setting The Cpu Of Rocky-P058Hv

    2.2 Setting the CPU of ROCKY-058HV Bold line is the factory setting jumper. • CPU Clock Setting : CPU Speed/Clock CLOSE CLOSE OPEN 55MHz CLOSE OPEN OPEN 60MHz 66MHz OPEN OPEN OPEN OPEN CLOSE CLOSE 75MHz • CPU frequency ratio : Multiplier 1.5 x OPEN...
  • Page 11 • JP8 CPU Core Voltage Setting : CPU Core Voltage 3.5V(P54C/CS) CLOSE CLOSE CLOSE CLOSE OPEN CLOSE CLOSE CLOSE 3.4V(P54C/CS) CLOSE OPEN CLOSE CLOSE 3.3V 3.2V OPEN OPEN CLOSE CLOSE CLOSE CLOSE OPEN CLOSE 3.1V OPEN CLOSE OPEN CLOSE 3.0V 2.9V CLOSE OPEN...

  • Page 12: System Memory Dram

    2.3 System Memory DRAM (DIMM1) There is one 168-pin DIMM socket to accept 3.3V non-buffered SDRAM. The max. Memory size is 128MB. 2.4 Watch-Dog Timer (JP3) The Watch-Dog Timer is enabled by reading port 443H. It should be triggered before the time-out period ends, otherwise it will assume the program operation is abnormal and will issue a reset signal to start again, or activate NMI to CPU.

  • Page 13: Clear Cmos Setup

    • JP4 & JP14 : DiskOnChip Memory Address Setting ADDRESS JP14 OPEN OPEN CLOSE OPEN OPEN CLOSE CLOSE CC000 OPEN OPEN OPEN CLOSE OPEN CLOSE CLOSE CE000 CLOSE OPEN OPEN OPEN CLOSE OPEN CLOSE D0000 OPEN CLOSE OPEN OPEN CLOSE OPEN CLOSE D2000...

  • Page 14: Connection

    Connection This chapter describes how to connect peripherals, switches and indicators to the ROCKY-058HV board. 3.1 Floppy Disk Drive Connector (CN3) ROCKY-058HV board is equipped with a 34-pin daisy-chain driver connector cable. • CN3 : FDC CONNECTOR PIN NO. DESCRIPTION PIN NO.

  • Page 15: Pci E-Ide Disk Drive Connector

    3.2 PCI E-IDE Disk Drive Connector (CN2, CN6) You can attach four IDE (Integrated Device Electronics) hard disk drives to the ROCKY-058HV IDE controller. CN2 (IDE 1) :40-pin Primary IDE Connector (3.5”HDD) CN6 (IDE 2) :44-pin Secondary Mini-pitched IDE Connector (2.5”HDD) •...
  • Page 16 • CN6 : Secondary IDE Interface Connector PIN NO. DESCRIPTION PIN NO. DESCRIPTION RESET# GROUND DATA 7 DATA 8 DATA 6 DATA 9 DATA 5 DATA 10 DATA 4 DATA 11 DATA 3 DATA 12 DATA 2 DATA 13 DATA 1 DATA 14 DATA 0 DATA 15...

  • Page 17: Parallel Port

    3.3 Parallel Port (CN1) This port is usually connected to a printer. The ROCKY-058HV includes an on-board parallel port, accessed through a 26-pin flat- cable connector CN1. • CN1 : Parallel Port Connector PIN NO. DESCRIPTION PIN NO. DESCRIPTION STROBE# DATA 0 DATA 1 DATA 2...

  • Page 18: Keyboard/Mouse Connector

    3.5 Keyboard & PS/2 Mouse Connector (CN14,CN13) A 6-pin mini DIN connector (CN14) is located on the mounting bracket for easy connection to a keyboard or PS/2 mouse. The card comes with a cable to convert from the 6-pin mini-DIN connector to two 6-pin mini-DIN connector for keyboard and mouse connection •...

  • Page 19: Usb Port Connector

    3.7 USB Port Connector (CN8,CN9) The ROCKY-058HV provides two USB interfaces, which gives the completed plug and play, for up to 127 external devices. One standard USB connector located on the central of metal bracket, while the other was via pin head connector located on the board at CN9, next to the CN8.

  • Page 20: Fan Connector

    • CN7 : 15-pin Female Connector GREEN BLUE GROUND GROUND GROUND GROUND GROUND DDC DAT HSYNC VSYNC DDCCLK 3.10 Fan Connector (FAN1) The ROCKY-058HV provides CPU cooling fan connector FAN1 which can supply 12V/500Ma max. to the cooling fan. It is limited in fan using, thus, don’t use it for other purpose.

  • Page 21: Award Bios Setup

    AWARD BIOS Setup The ROCKY-058HV uses the AWARD PCI/ISA BIOS for system configuration. The AWARD BIOS setup program is designed to provide maximum flexibility in configuring the system by offering various options that may be selected for end-user requirements. This chapter is written to assist you in the proper usage of these features.

  • Page 22: Standard Cmos Setup

    4.2 Standard CMOS Setup The Standard CMOS Setup is used for basic hardware system configuration. The main function is for Date/Time setting and Floppy/Hard Disk Drive setting. Please refer the following screen for this setup. For IDE hard disk drive setup, please check the following possible setup procedure, 1.
  • Page 23 Halt On (All Errors) : You could choose All Errors , No Errors All,but Keyboard , All.but Diskette , and All,but Disk/Key As for some embedded system which don’t need keyboard and monitor in application,then you could choose No Errors.

  • Page 24: Bios Features Setup

    4.3 BIOS Features Setup This BIOS Features Setup is designed for customer‘s tuning best performance of the ROCKY-058HV board. As for normal operation customers don‘t have to change any default setting. The default setting is pre-set for most reliable operation. BootUp Sequence : You could set the sequence of A:, C:, and CDROM.

  • Page 25: Chipset Features Setup

    4.4 Chipset Features Setup This setup functions are almost working for ChipSet (SIS 5598). These options are used to change the ChipSet‘s registers. Please carefully change any default setting ,otherwise the system could be running unstable. Auto Configuration : Enable or Disable When use the 60nS general type DRAM, please enable the setting to get the optimal timings.

  • Page 26: Integrated Peripherals

    4.5 Integrated Peripherals This setup is almost working for Multi-I/O Chip(W83877F ). These options are used to change the ChipSet‘s registers. Please carefully change any default setting to meet your application need perfectly. The only special concern is Onboard Serial Port2. If you are using the IrDA port, you have to set this port accordingly.

  • Page 27: Power Management Setup

    4.6 Power Management Setup Power Management Setup help user handles the ROCKY-058HV board‘s “green” function. The features could shut down the video display and hard disk to save energy for example. The power management setup screen is as following, Power Management : Disable, Max Saving, Min Saving, or User Defined Max Saving puts the system into power saving mode after a brief inactivity period.

  • Page 28: Pnp/Pci Configuration

    4.7 PNP/PCI Configuration The PNP/PCI Configuration help users handle the ROCKY-058HV board‘s “PCI” function, but the PCI interface that the ROCKY- 058HV provides only is the on board IDE. The PCI bus slot on the system uses INTA#, thus the installed PCI slot must be set to this value.

  • Page 29: Appendix A. Watch-Dog Timer

    Appendix A. Watch-Dog Timer The WatchDog Timer is provided to ensure that standalone systems can always recover from catastrophic conditions that cause the CPU to crash. This condition may have occurred by external EMI or a software bug. When the CPU stops working correctly, hardware on the board will perform a hardware reset (cold boot) to bring the system back to a known state.
  • Page 30 A tolerance of at least 5% must be maintained to avoid unknown routines within the operating system (DOS), such as disk I/O that can be very time consuming. Therefore if the time out period has been set to 10 seconds, the I/O port 443H must be read within 7 seconds.

  • Page 31: Appendix B. I/O Address Map

    Appendix B. I/O Address Map • I/O Address Map I/O Address Map Description 000-01F DMA Controller #1 020-021 Interrupt Controller # 1, Master 040-05F System Timer 060-06F Standard 101/102 keyboard Controller 070-07F Real time Clock, NMI Controller 080-0BF DMA Page Register 0A0-0BF Interrupt Controller # 2 0C0-0DF...
  • Page 32 1st MB Memory Address Map Memory address Description 00000-9FFFF SYSTEM MEMORY A0000-BFFFF VGA BUFFER C0000-C7FFF VGA BIOS D6000-D7FFF DEFAULT DOC2000 ADDRESS E0000-FFFFF SYSTEM BIOS 100000 EXTEND MEMORY IRQ Mapping Chart IRQ0 SYSTEM TIMER IRQ8 RTC CLOCK IRQ1 KEYBOARD IRQ9 IRQ2 IRQ CONTROLLER IRQ10 NO USED IRQ3 COM2/COM4 IRQ11 USB...

Table of Contents