Removing The Main Battery - Motorola MC70 User Manual

With the battery cover latches open, insert the cover, bottom first, then press down on the top of the cover.
3.
Inserting the Battery Cover
Figure 1-4
Close the battery cover latches on either side of the battery cover.
4.
Insert the handstrap through the handstrap slot, then tighten and press down to secure.
5.
Handstrap
Inserting the Handstrap
Figure 1-5
The EDA powers up after inserting the battery.

Removing the Main Battery

Press the red Power button to suspend the EDA.
1.
Loosen the handstrap at the top of the EDA.
2.
Open the battery cover latches on either side of the battery cover.
3.
Opening the Battery Cover Latches
Figure 1-6
Battery Cover Latch
Battery Cover
Handstrap Slot
Battery Cover Latch
Getting Started 1 - 5