Headset; Multi Media Card (Mmc) / Secure Digital (Sd) Card - Motorola MC70 User Manual

5 - 2 MC70 User Guide

Headset

Use the headset to communicate via Voice-Over-IP (VOIP) or for audio playback and telephony applications.
To connect the headset, remove the plug from the headset jack at the top of the EDA and insert the headset
connector. Contact a Symbol representative for compatible headsets.
For best performance, Symbol recommends a 2.5mm jack headset, p/n 50-11300-050.
Headset Connection
Figure 5-1

Multi Media Card (MMC) / Secure Digital (SD) Card

The MMC/SD card slot provides secondary non-volatile storage. The slot is located on the side of the EDA
(see Figure 5-2). Refer to the documentation provided with the card for more information, and follow the
manufacturer's recommendations for use. The slot also accepts SDIO cards.
NOTE SD cards are interoperable with MMC cards; both can be used in MC70 EDAs.
CAUTION
To insert the MMC/SD card:
Power off the EDA.
1.
Remove the card cover on the side of the EDA by loosening the screws and lifting the cover out of the slot.
2.
Follow proper ESD precautions to avoid damaging the MMC/SD. Proper ESD precautions include,
but are not limited to, working on an ESD mat and ensuring that the operator is properly grounded.