Vehicle Cradle - Motorola MC70 User Manual

Troubleshooting the Four Slot Ethernet Cradle (Continued)
Table 6-4
Symptom
Battery is not
charging.

Vehicle Cradle

Troubleshooting the Vehicle Cradle
Table 6-5
Symptom
EDA battery charging
LED does not light
up.
EDA battery is not
recharging.
Cause
EDA removed from Replace the EDA in the cradle. The standard capacity battery
the cradle too (1900 mAh) fully charges in less than four hours. The extended
soon. capacity battery (3800 mAh) fully charges in less than eight
hours. Tap
status.
Battery is faulty. Verify that other batteries charge properly. If so, replace the
faulty battery.
EDA is not inserted Remove the EDA and reinsert it correctly. Verify charging is
correctly in the active. Tap
cradle. status.
Ambient Move the cradle to an area where the ambient temperature is
temperature of the between 0
cradle is too warm.
Possible Cause
Cradle is not Ensure the power input cable is securely connected to the
receiving power. cradle's power port.
EDA was removed Replace the EDA in the cradle. The standard capacity battery
from the cradle too (1900 mAh) fully charges in less than four hours. The extended
soon. capacity battery (3800 mAh) fully charges in less than eight
hours.
Battery is faulty. Replace the battery.
EDA is not placed Remove the EDA from the cradle, and re-insert correctly. If the
correctly in the battery still does not charge, contact customer support.
cradle. The EDA battery charging LED slowly blinks amber when the
EDA is correctly inserted and charging.
Ambient Move to an area where the ambient temperature is between 0
temperature of the and 35
cradle is too warm.
Maintenance & Troubleshooting
Solution
> >
Start Settings System
> >
Start Settings System
o o
C and 35 C.
Action
o
C.
6 - 9
> to view battery
Power
> to view battery
Power
o
C