Using A Cradle - Motorola MC70 User Manual

5 - 16 MC70 User Guide
Scanning
To scan bar codes:
Start the EDA's scanning application.
1.
Aim the EDA at the bar code.
2.
Pull the trigger on the handle. The Scan/Decode LED lights and a beep sounds to indicate a successful
3.
decode.
Scanning with the Trigger Handle
Figure 5-17

Using a Cradle

CAUTION Do not place a Trigger Handle with an attachment, such as a Magnetic Stripe Reader (MSR) into a
cradle. Remove the attachment before inserting the Trigger Handle into the cradle.
To charge the EDA's battery while the EDA is in the Trigger Handle, insert the EDA into either the Single-Slot
USB/Serial cradle or the Four-Slot Ethernet cradle.