Charging Temperature; Four Slot Ethernet Cradle - Motorola MC70 User Manual

5 - 6 MC70 User Guide

Charging Temperature

Charge batteries in temperatures from 0
charging is intelligently controlled by the EDA and the charging accessory in order to ensure safe operation
and optimize long-term battery life.
To accomplish this, for small periods of time, the EDA or accessory alternately enables and disables battery
charging to keep the battery at acceptable temperatures. The EDA or accessory indicates when charging is
disabled due to abnormal temperatures via its LED. See
Spare Battery LED Charging Indicators
Table 5-1
Spare Battery LED
(on cradle)
Off
Slow Blinking Amber
Solid Amber
Fast Blinking Amber

Four Slot Ethernet Cradle

This section describes how to set up and use a Four Slot Ethernet cradle with the EDA. For cradle
communication setup procedures refer to the MC70 Integrator Guide.
The Four Slot Ethernet cradle:
•
Provides 5.4 VDC power for operating the EDA.
•
Connects the EDA (up to four) to an Ethernet network.
•
Simultaneously charges up to four EDAs.
NOTE Use only a Symbol-approved power supply output rated 12 Vdc and minimum 9A. The power supply is
certified to EN60950 with SELV outputs. Use of an alternative power supply will invalidate any approval
given to this device and may be dangerous.
H
INWEIS
o
C to 40
Battery is not charging; battery is not inserted correctly in the
cradle; cradle is not powered
Spare battery is charging.
Charging complete.
Charging error.
Benutzen Sie nur eine von Symbol Technologies genehmigte Stromversorgung mit einer
Ausgangsleistung von 12 V (Gleichstrom) und mindestens 9A. Die Stromversorgung ist nach
EN60950 für die Verwendung in SELV-Stromkreisen zertifiziert. Bei Verwendung eines anderen
Netzteils werden alle für das Gerät gewährten Genehmigungen außer Kraft gesetzt, und der Betrieb
kann gefährlich sein.
o
C (32°F to 104°F). Note that at temperatures above 35
Table 1-2 on page 1-7
Indication
o
C,
and Table 5-1.