Inserting the Battery
Figure 1-7
The MC55 powers up automatically after inserting the battery if the battery has been charged previously.
Charging the Battery
CAUTION
Ensure that you follow the guidelines for battery safety described in
Charging the Main Battery
Before using the MC55 for the first time, charge the main battery until the amber Charging/Battery Status LED
remains lit (see
Table 1-2 on page 1-8
with the appropriate power supply. For information about the accessories available for the MC55, see
Accessories.
For cable and cradle setup and charging procedures refer to the MC55 Integrator Guide.
•
USB Charging Cable
•
Charge Only Cable
•
Single Slot USB Cradle
•
Four Slot Charge Only Cradle
•
Four Slot Ethernet Cradle.
To charge the main battery:
Connect the charging accessory to the appropriate power source.
1.
Insert the MC55 into a cradle or attach to a cable. The MC55 begins charging. The Charging/Battery Status
2.
LED blinks amber while charging, then turns solid amber when fully charged. See
indications.
Battery Release Latch
for charge status indications). To charge the MC55, use a cable or a cradle
Getting Started
Battery
Battery Safety Guidelines on page
Chapter 6,
Table 1-2
for charging
1 - 7
7-2.