Suspend; Resume; Bluetooth Profiles; Modes - Motorola MC70 User Manual

3 - 4 MC70 User Guide

Suspend

Suspending the EDA turns off Bluetooth.
NOTE Suspending the EDA powers off the Bluetooth radio and drops the piconet (Bluetooth connection). When
the EDA resumes, it take approximately 10 seconds for the Bluetooth radio driver to re-initialize the radio.

Resume

When the EDA resumes, Bluetooth turns on if it was on prior to suspend.

Bluetooth Profiles

The mobile computer is loaded with a number of Bluetooth services profiles. These profiles can be loaded or
removed from memory. If a profile is not used, it can be removed to save memory. To load or remove profiles:
Tap >
1. Programs
Bluetooth Profile Selector Window
Figure 3-3
Tap a check box next to the profile to load (activate).
2.
The Serial Port profile is always active and cannot be removed.
Tap
3. Select All
Tap to activate the profiles and then
4. Apply
See Services Tab on page 3-24

Modes

The BTExplorer application has two mode for managing Bluetooth connections: Wizard Mode and Explorer
Mode. The Wizard Mode is for novice Bluetooth users and the Explorer Mode is for experienced Bluetooth
users. To switch between modes, select
> . The
BTProfileSelctor
to select all profiles or tap
for more information on selecting services.
View
window appears.
ProfileSelector
to deselect all profiles.
Deselect All
to exit the application.
Close
> or >
Wizard Mode View Explorer Mode
.