SIM Card
NOTE MC7004 and MC7094 only.
GPRS phone service requires a Subscriber Identification Module (SIM) card, or smart card. Obtain this card
from the phone service provider. The card fits into the EDA and can contain the following information:
•
Mobile phone service provider account details.
•
Information regarding service access and preferences.
•
Contact information, which can be moved to Contacts on the EDA.
•
Any additional services to which you have subscribed.
NOTE For more information about SIM cards, refer to the mobile phone service provider's documentation.
To install the SIM card:
Press the red Power button to suspend the EDA.
1.
Remove the battery.
2.
Lift the SIM cover using the stylus tip.
3.
Lifting the SIM Cover
Figure 1-8
Insert the SIM card, as shown in
4.
down.
Inserting the SIM Card
Figure 1-9
Lower the SIM cover and snap it in place.
5.
Replace the battery and battery cover.
6.
SIM Cover
Figure
1-9, with the cut edge of the card facing out and the contacts facing
Getting Started
1 - 9