Motorola MC70 User Manual page 74

3 - 16 MC70 User Guide
Before setting up dial-up networking, obtain dial-up information and other necessary settings for the office
network or ISP. To create a new Bluetooth connection:
Ensure the EDA is discoverable and connectable. See
1.
Discover and bond (pair) with the remote device. See
2.
In , select the
3. BTExplorer
Select the
4. Trusted Devices
Tap the remote device folder.
5.
Tap and hold on
6.
Networking Entry
Select Dial-up Networking Entry Window
Figure 3-22
NOTE If a dial-up entry is not listed, see
Select a dial-up entry.
7.
Tap . The EDA begins to communicate with the phone. If required, the phone requests permission to
8. OK
communicate with the EDA.
Confirm the connection on the phone. The
9.
Network Log On Window
Figure 3-23
folder.
Remote Devices
folder.
and select
Dial-up Networking
window appears.
Adding a Dial-up Entry on page
Network Log On
Bluetooth Settings on page
Bonding with Discovered Device(s) on page
from the pop-up menu. The
Connect
3-17.
window appears.
3-24.
3-9.
Select Dial-up