Single Slot Charge Cradle; Setup; Charging The Mc45 Battery - Motorola MC45 Integrator Manual

2 - 4 MC45 Integrator Guide

Single Slot Charge Cradle

This section describes how to set up and use a Single Slot Charge Cradle with the MC45. The Single Slot
Charge Cradle:
•
Provides 5.0 VDC power for operating the MC45.
•
Charges the MC45's battery.

Setup

Figure 2-2 Single Slot Charge Cradle Power Connections

Charging the MC45 Battery

NOTE Use the MC45 micro USB port when charging a completely depleted battery. See
page 2-17
Connect the cradle to the Power Supply as shown in
charging.
Figure 2-3 MC45 Battery Charging
Power Port
for more information.
Charging/Battery Status
LED
Power Supply
USB Rapid
Charge Cable
Figure 2-2. Insert the MC45 into the cradle slot to begin
Battery Charging on