Hoop Reference Position; Embroidering Using The Test Design - Fritz Gegauf Bernina artista 630 Service Manual

6h Hoop reference position:
What to test:
•
Hoop center reference point.
•
Attach embroidery module and hoop.
•
Place template (item 030 576.50.01 red) in hoop.
•
Press "check" icon. EMB moves to reference point.
•
Use the arrow keys to correct/adjust the center position.
•
Press OK to save the value and to return to menu 6.
•
Press ESC to return to menu 6 without saving.
Repairing note:
•
Check tests 6c to 6g.
•
Check X and Y drive belt tension.
•
Check if drive pinion of stepping motors is free of threads.
6i Embroidering using the test design:
What to test:
•
Hoop sew-off cotton and stabilizer.
•
Attach embroidery module and hoop.
•
Select test design.
•
Stitch test design. Check it.
•
Press CLR to return to menu 6.
•
For test design assessment see p. 98.
Service-Manual_artista_630_640_english_V4.01_032069_50_04.doc
99