Chapter 1 General Information; Safety Regulations - Fritz Gegauf Bernina artista 630 Service Manual

1.1 Safety Regulations

Caution!
All electrical and electronic components operate at dangerous voltages. Remove the mains plug
before making any adjustments to the machine. Wait about 30 seconds after removing the plug
(capacitor discharge).
This service manual is intended to help with minor repairs and adjustments.
The instructions do not claim to be complete or comprehensive. The manual does not provide guidance
for complete assembly or disassembly.
Important:
To enable the work described to be performed correctly, the sewing and embroidery computer
must be in good mechanical and electrical condition (running smoothly, properly oiled and all
leads connected)! When adjustments are carried out in the correct order, the sewing/embroidery
computer will function without a problem.
It is important that only devices approved and distributed by BERNINA® are connected to the
sewing/embroidery computer ports.
When servicing or repairing, always use genuine parts and original accessories, either those
delivered with the machine or purchased afterwards.
These are the following:
•
Mains cable
•
Foot control unit
•
Buttonhole foot
•
Presser foot 1
•
Bobbin case with bobbin
•
Other accessories
•
BERNINA stitch length regulator (BSR) foot (if applicable).
The Service Manual and Instructions are protected by copyright laws. These documents are
delivered exclusively to the recipient. It is forbidden to copy, distribute, forward, publish or to
reproduce them in any form without the express prior consent of Fritz Gegauf AG, BERNINA
Steckborn, Switzerland. It is also forbidden to record this Service Manual and Instructions on any
retrieval system, or to translate it, or parts of it, into any human or computer-related language of
any kind, whether electronically, mechanically, magnetically, or otherwise. Furthermore, it is
prohibited to disclose the Service Manual and Instructions to third parties without the express
written approval of Fritz Gegauf AG, BERNINA Sewing machine manufacturers, Steckborn,
Switzerland.
This Manual is subject to revisions without notice. The recipient is responsible for updating the
information provided by Fritz Gegauf AG, BERNINA Sewing machine manufacturers, Steckborn,
Switzerland.
Masthead
Author: Hans Peter Horn
Layout/typesetting: Hans Peter Horn
Print:
Chapter 1
General information
Service-Manual_artista_630_640_english_V4.01_032069_50_04.doc
2