4.5 Carrying handle
Disassembly:
1. Remove rear cover.
2. Remove spool pin (130)
see p. 21.
3. Push pin (132) out to
the left and remove.
4. Carefully prise lock
(133) apart using a
screwdriver. Push pin
(134) out to the right
and remove.
5. Remove handle (135)
and replace.
Assembly:
1. Insert handle (135).
2. Slide pin (134) in from the right until it engages.
3. From the left move pin (132) to the stop.
4. Refit spool pin (130) and thread-guide eyelet (131).
5. Refit cover.
6. Carry out a functional check.
7. Sew-off
134
Service-Manual_artista_630_640_english_V4.01_032069_50_04.doc
133
135
132
130
23