1b Sewing/embroidery computer soft- and firmware data:
What to test:
•
S-Print EAN code
•
L-Print EAN code
Note:
•
EAN = European Article Number
•
The number must be checked and re-entered if deviating when
replacing S- and L-Prints.
•
Use the right scrolling arrow
•
Information on version and technical data is given there.
What to test:
•
Software version:
•
Bootloader version:
•
Memory flash / RAM:
•
EXP engine version:
•
BSR application version:
•
EMB BIOS version:
Note:
•
Updating see p. 99.
:
What to test
•
Technical information data.
Note:
•
Technical data can be entered there in the page, using the virtual
keyboard.
•
The entered data gives the technician information on already made
improvements.
1c Sewing/embroidery computer operating time data
What to test:
•
Time Power On:
•
Time Standby:
•
Time Working:
•
Time Sewing:
•
Time Embroidery:
•
Time BSR:
Note:
•
Total number of operating hours of each category in the sewing and embroidery system.
to go to the next pages.
Service-Manual_artista_630_640_english_V4.01_032069_50_04.doc
71