Menu 6 - Embroidery Module (Emb); Embroidery Module Basic Data - Fritz Gegauf Bernina artista 630 Service Manual

6.8 Menu 6 – Embroidery module (EMB)
6a Embroidery module basic data:
What to test:
•
Production dates.
•
Serial Number. Is entered by the production. It can not be changed.
•
Chassis number. Is entered by the production. It can not be changed.
•
Production date. Is entered by the production. It can not be changed.
•
EAN code. Is entered by the production. It can be changed using the
virtual keyboard after replacing the EMB PCB.
•
EMB BIOS version. Displays the installed BIOS version on the
machine.
Repairing note:
•
EMB updating.
Use the right scrolling arrow
fields.
•
Purchase Date,
•
Time Power: On,
•
Time Standby,
•
Time Embroidery,
Note:
•
There are 5 pages for 5 users.
•
Each user's operating times can be established separately. This
requires that the purchase date is entered with each change of user.
Operating and stitching times are then automatically updated by the
system.
Use the right scrolling arrow
•
The tests are selected by pressing the appropriate
button.
•
The EMB test menu contains information on the
configuration and the state of the embroidery module. It
also contains tests for the individual components.
•
Data, saving, and changing are explained below.
to go to the purchase, operating hours and stitching times data entry
= Date of sale/purchase
= Total hours under power
= Total hours under power but without activity
= Stitching time in embroidery mode
to go to the technical data entering fields.
Service-Manual_artista_630_640_english_V4.01_032069_50_04.doc
95