Menu 5 - Adjustments; Sewing-Off (Customer's View) - Fritz Gegauf Bernina artista 630 Service Manual

Step Position (degree)
1 130°
2 213°
3 125°
4 40°
5 40°
6 40°
7 213°
8 213°
9 213°
10
Repairing note:
•
Check cutting edge of thread cutting blade. If blunt, replace thread cutting blade (p. 39).
•
Check position of synchronizing disc – see test 3n (p. 79).
•
Replace P-Print.
•
Replace S-Print.
6.7 Menu 5 – Adjustments
5a Sewing-off (customer's view):
What to test:
•
Press icon 5a to open the sewing program in customer's view.
•
The machine can be sewn off using different stitch patterns.
•
Press CLR to return to service program.
Motion
Run to Nearest Position
Run to Position Forward
Run to Position Forward
Run to Position Backward
Set Thread Tension
Close Thread Clamp
Run to Position Backward
Restor Thread Tension
Open Thread Clamp
Store Thread Tension
•
The tests are selected by pressing the appropriate button.
•
Testing and adjusting of balance, buttonhole,
configuration, presser foot pressure, BSR foot, thread
tension. Carrying out of resets.
•
The tests are displayed by the page with the page
reference in green.
•
Explanations of tests and how to change and save tests
are given below.
Service-Manual_artista_630_640_english_V4.01_032069_50_04.doc
Movement / Action
Starting position
Turns forward
Turns forward
Turns backward
Thread tension activated
Thread clamp activated
Turns backward
Thread tension deactivated
Thread clamp deactivated
Thread tension activated
89