Thread Cutter Clamping Magnet: Artista 640; Thread Cutting Process: Artista 640 - Fritz Gegauf Bernina artista 630 Service Manual

4m Thread cutter clamping magnet: artista 640
What to test:
•
The thread cutter clamping magnet toggles on pressing icon 4m.
•
Press icon 4m again to end the test.
•
If o.k., Test done appears.
•
If failed, Test failed! appears.
Repairing note:
•
Check the cable for deformation, tears or breaks. Replace if
necessary.
•
Replace basting magnet.
•
Replace P-Print.
•
Replace S-Print.
4n Thread cutting process: artista 640
What to test:
•
Each pressing of the thread cutter button triggers the individual
processes (10 working steps).
Service-Manual_artista_630_640_english_V4.01_032069_50_04.doc
88