Free-Arm Adapter Sensor - Fritz Gegauf Bernina artista 630 Service Manual

What to test:
Technical information data entry.
•
Technical data can be entered here in this page, using the virtual
keyboard.
•
The entered data give the technician information on already made
improvements.
Use the right scrolling arrow
What to test:
•
Total hours and stitch count in EMB
•
Time Power: On,
•
Time Standby,
•
Time Embroidery,
6b Free-arm adapter sensor:
What to test:
•
Attach free-arm adapter and embroidery module.
•
Press icon b. The bar appears in green after recognition of the sensor.
Test Successful! appears.
•
Test failed! appears if an error occurred.
Repairing note:
•
Ensure that the free-arm adapter and EMB are in the correct positions.
•
Check connecting cables. Replace if necessary.
•
Check EMB PCB and S-Print. Replace if necessary.
•
Replace sensor.
to go to the total hours and stitch count information.
= Total hours under power
= Total hours under power but without activity
= Stitching time in embroidery mode
Service-Manual_artista_630_640_english_V4.01_032069_50_04.doc
96