X-Axis Sensor; Y-Axis Sensor - Fritz Gegauf Bernina artista 630 Service Manual

6c X-axis sensor:
What to test:
•
Attach embroidery module and hoop.
•
Press icon b. The bar appears in green after recognition of the sensor.
Test Successful! appears.
•
Test failed! appears if an error occurred.
Repairing note:
•
Replace EMB S-Print.
6d Y-axis sensor:
What to test:
•
Attach embroidery module and hoop.
•
Press icon b. The bar appears in green after recognition of the sensor.
Test Successful appears.
•
Test failed! appears if an error occurred.
Note:
•
The type of the attached hoop is displayed after successful recognition.
Repairing note:
•
Replace Y-sensor.
•
Replace EMB S-Print.
Service-Manual_artista_630_640_english_V4.01_032069_50_04.doc
97