Use the right scrolling arrow
data entering.
There are 5 entry fields available.
•
The sixth entry overwrites the first entry.
•
Maintained by...on = Entered by ... on (date)
Note:
•
When resetting the servicing stitches the virtual keyboard opens.
Repairing data must be entered first now. Otherwise the stitch
counter is not set to zero.
1g Saving of customer data
What to test:
•
When replacing the S-Print, it is essential to save the customer's
data first.
•
For this, a BERNINA USB memory stick is used.
•
Save the Customer settings
•
Load the Customer Settings
Note:
•
Connect BERNINA USB memory stick and select required field. Remove the stick after saving of
data has been confirmed.
1h Customer data:
What to test:
•
Customer First Name:
•
Customer Last Name:
•
Customer Telephone Number: = Customer's phone number.
Note:
•
The virtual keyboard opens on selecting a field.
1i Dealer data:
What to test:
•
Dealer Store Name 1:
•
Dealer Store Name 2:
•
Dealer Telephone Number:
•
Dealer Internet Address:
Note:
•
The virtual keyboard opens on selecting a field.
Customer data can now be entered.
•
Dealer data can also be read and entered in .txt format from BERNINA USB memory stick.
to go to the next page. Service and repair
= Saving of customer data on a
BERNINA USB memory stick.
= Loading of customer data to the
sewing/embroidery system.
= Customer's first name.
= Customer's last name.
= Name of the store (1
= Name of the store (2
= Dealer's phone number.
= Dealer's internet address
Service-Manual_artista_630_640_english_V4.01_032069_50_04.doc
st
Store)
nd
Store)
73