Chapter 4 Replacing Assemblies; Removing Covers - Fritz Gegauf Bernina artista 630 Service Manual

4.1 Removing covers

Before making adjustments, the covers must be removed in the following order:
Head cover:
1. Remove screw (5).
2. Remove head cover.
Attention! The a-640 must have the head cover
refitted when sewing-off.
Rear cover:
1. Remove screw (6).
2. Remove screws (7)
(3 screws).
Remove L-Print
cable.
3. Remove rear cover.
4. The covers are linked
with clips
at the points (B).
Slightly press
against the points to
'de-clip' them.
Note:
Be sure not to squash the CFL and buttonhole sensor cables in the head area (A) when refitting the covers.
Chapter 4
Replacing Assemblies
B
Service-Manual_artista_630_640_english_V4.01_032069_50_04.doc
5
7
7
B
B
6
B
A
7
20