Creating Static Ip Wan Connection - D-Link DAP-1360 User Manual

DAP-1360 Wireless N 300 Access Point & Router
User Manual

Creating Static IP WAN Connection

To create a connection of the Static IP type, click the Add button on the Net / WAN page. On the
opened page, select the Static IP value from the Connection Type drop-down list and specify
the needed values.
Figure 105. The page for creating a new connection. The General settings and Ethernet sections.
Parameter
Port
Name
Enable
Direction
MTU
General settings
A physical interface to which the new connection will be assigned.
A name for connection for easier identification.
Select the checkbox to enable the connection.
The direction of this connection.
Ethernet
The maximum size of units transmitted by the interface.
Page 133 of 212
Configuring Device (Router Mode)
Description