D-Link DAP-1360 User Manual page 178

DAP-1360 Wireless N 300 Access Point & Router
User Manual
You can specify the following parameters:
Parameter
DDNS Service
Host name
User name
User password
Interface
Update period
Click the Change button.
To edit parameters of the existing DDNS service, click the relevant service link. On the opened
page, change the needed parameters and click the Change button.
To remove an existing DDNS service, click the relevant service link. On the opened page, click the
Delete button.
Figure 137. The page for editing the DDNS service.
Select a DDNS provider from the drop-down list.
The domain name registered at your DDNS provider.
The username to authorize for your DDNS provider.
The password to authorize for your DDNS provider.
Select a WAN connection which IP address will be used to access
the DDNS service.
An interval (in minutes) between sending data with the IP address of
the interface specified in the field above to the relevant DDNS
service.
Page 178 of 212
Configuring Device (Router Mode)
Description