D-Link DAP-1360 User Manual page 130

DAP-1360 Wireless N 300 Access Point & Router
User Manual
Parameter
MAC
Figure 103. The page for creating a new connection. The PPP section.
A MAC address assigned to the interface. This parameter is
mandatory if your ISP uses MAC address binding. In the field, enter
the MAC address registered by your ISP upon concluding the
agreement.
You can click the Clone MAC Address button (
MAC address of the network interface card (of the computer that is
being used to configure the access point at the moment) as the MAC
address of the WAN interface.
Also you can set the address of a device connected to the access
point's LAN at the moment. To do this, select the relevant value
from the drop-down list (the field will be filled in automatically).
Page 130 of 212
Configuring Device (Router Mode)
Description
) to set the