D-Link DAP-1360 User Manual page 31

DAP-1360 Wireless N 300 Access Point & Router
User Manual
To configure the access point's WLAN parameters, left-click the SSID of the WLAN (the right
column of the SSID line). After clicking the line, the Wi-Fi / Basic settings page opens (for the
detailed description of the page, see the Basic Settings section, page 50).
To configure the access point's wireless network, click the Wireless network settings wizard
link in the Wi-Fi section (for the detailed description of the Wizard, see the Wireless Network
Settings Wizard section, page 37).
To configure all parameters of the access point independently without the Wizard, click the
Advanced settings link in the bottom right corner of the page.
Figure 21. The advanced settings page in the access point mode.
The pages of the Status section display data on the current state of the access point (for the
description of the pages, see the Status section, page 43).
The page of the Net section is designed for configuring basic parameters of the LAN interface of
the access point (for the description of the page, see the Net section, page 46).
The pages of the Wi-Fi section are designed for specifying all needed settings of the access point's
wireless network (for the description of the pages, see the Wi-Fi section, page 49). Also you can
enable or disable the device's WLAN directly from the advanced settings page. To enable the
WLAN, select the On position (
WLAN, select the Off position (
The page of the Firewall section is designed for configuring MAC-address-based filtering for
computers of the access point's LAN (for the description of the page, see the Firewall section, page
72).
) of the Enable/Disable Wi-Fi switch. To disable the
) of the Enable/Disable Wi-Fi switch.
Page 31 of 212
Installation and Connection