D-Link DAP-1360 User Manual page 111

DAP-1360 Wireless N 300 Access Point & Router
User Manual
Parameter
Ping
Click the Next button to continue.
In the Connection name field, specify a name for the connection for easier identification.
In the Username field, enter your login, and in the Password and Password confirmation
fields – the password provided by your ISP.
In the VPN server address field, enter the IP or URL address of the PPTP or L2TP
authentication server.
As a rule, the specified settings are enough to configure a protected connection (the VPN tunnel). If
you need to specify additional settings, open the expert settings mode. To do this, use the switch in
the bottom left corner of the page.
Select the checkbox to allow the access point to answer ping
requests from the external network through this connection. For
security reasons, it is recommended not to select this checkbox.
Figure 85. Configuring PPTP + Dynamic IP WAN connection.
Page 111 of 212
Configuring Device (Router Mode)
Description