Additional Settings - D-Link DAP-1360 User Manual

DAP-1360 Wireless N 300 Access Point & Router
User Manual

Additional Settings

On the Wi-Fi / Additional settings page, you can define additional parameters for the WLAN of
the access point.
!
Changing parameters presented on this page may negatively affect your WLAN!
The following fields are available on the page:
Parameter
Station Keep Alive
Beacon Period
RTS Threshold
Frag Threshold
DTIM Period
Figure 131. Additional settings of the WLAN.
The time interval (in seconds) between keep alive checks of wireless
devices from your WLAN. When the value 0 is specified, the
checking is disabled.
The time interval (in milliseconds) between packets sent to
synchronize the wireless network.
The minimum size (in bites) of a packet for which an RTS frame is
transmitted.
The maximum size (in bites) of a non-fragmented packet. Larger
packets are fragmented (divided).
The time period (in seconds) between sending a DTIM (a message
notifying on broadcast or multicast transmission) and data
transmission.
Page 168 of 212
Configuring Device (Router Mode)
Description