DAP-1360 Wireless N 300 Access Point & Router
User Manual
Creating PPTP + Static IP or L2TP + Static IP WAN Connection
To create a connection of the PPTP + Static IP or L2TP + Static IP type, click the Add button on the
Net / WAN page. On the opened page, select the relevant value from the Connection Type drop-
down list and specify the needed values.
Figure 109. The page for creating a new connection. The General settings and Ethernet sections.
Parameter
Port
Name
Enable
Direction
MTU
General settings
A physical interface to which the new connection will be assigned.
A name for connection for easier identification.
Select the checkbox to enable the connection.
The direction of this connection.
Ethernet
The maximum size of units transmitted by the interface.
Page 139 of 212
Configuring Device (Router Mode)
Description