D-Link DAP-1360 User Manual page 51

DAP-1360 Wireless N 300 Access Point & Router
User Manual
Parameter
Hide Access Point
SSID
Country
Channel
Wireless mode
Max Associated Clients
When you have configured the parameters, click the Change button.
If the checkbox is selected, other users cannot see your Wi-Fi
network. (It is recommended not to select this checkbox in order to
simplify initial configuration of your WLAN.)
A name for the WLAN. By default, the value DAP-1360 is
specified. If your network is splitted into parts, each part has the
default name (DAP-1360.2, DAP-1360.3, and DAP-1360.4).
It is recommended to specify another name for the network upon
initial configuration (use digits and Latin characters).
The country you are in. Select a value from the drop-down list.
The wireless channel number. When the auto value is selected, the
access point itself chooses the channel with the least interference.
Operating mode of the wireless network of the access point. This
parameter defines standards of the devices that will be able to use
your wireless network. Select a value from the drop-down list.
The maximum number of devices connected to the wireless network
of the access point. When the value 0 is specified, the device does
not limit the number of connected clients.
Page 51 of 212
Configuring Device (Access Point Mode)
Description