Firmware Upgrade - D-Link DAP-1360 User Manual

DAP-1360 Wireless N 300 Access Point & Router
User Manual

Firmware Upgrade

On the System / Firmware upgrade page, you can upgrade the firmware of the access point.
!
Upgrade the firmware only when the access point is connected to your PC via a wired
connection.
The current version of the access point's firmware is displayed in the Firmware version field
located next the D-Link logo in the top left corner of the page. If you need to install a newer version
of the firmware, follow the next steps:
!
Attention! Do not turn off the access point before the firmware upgrade is completed.
This may cause the device breakdown.
1. Download a new version of the firmware from www.dlink.ru.
2. Click the Choose/Browse
the new firmware file.
3. Click the Update button to upgrade the firmware of the access point.
4. Wait until the access point is rebooted (about one and a half or two minutes).
5. Log into the web-based interface using the login (admin) and the current password.
2 The name of the button depends upon the web browser that you use.
Figure 59. The System / Firmware upgrade page.
2 button on the System / Firmware upgrade page to locate
Page 80 of 212
Configuring Device (Access Point Mode)