D-Link DAP-1360 User Manual page 41

DAP-1360 Wireless N 300 Access Point & Router
User Manual
When the Open or Shared value is selected, the WEP Encryption settings section is displayed
(the section is unavailable for the wireless network operating modes which support the standard
802.11n):
Figure 30. The Open value is selected from the Network Authentication drop-down list.
Parameter
Enable Encryption WEP
Default Key ID
Encryption Key WEP
as HEX
Encryption Key WEP (1-
4)
The checkbox activating WEP encryption. When the checkbox is
selected, the Default Key ID field, the Encryption Key WEP as
HEX checkbox, and four Encryption Key WEP fields are
displayed on the page. For the
checkbox is always selected.
The number of the key (from first to fourth) which will be used for
WEP encryption.
Select the checkbox to set a hexadecimal number as a key for
encryption.
Keys for WEP encryption. The access point uses the key selected
from the Default Key ID drop-down list. It is required to specify all
the fields.
You can specify keys containing 5 or 13 symbols (use digits and/or
Latin characters). If the Encryption Key WEP as HEX checkbox
is selected, you can specify only keys containing 10 symbols (the
digits 0-9 and the characters A-F).
Page 41 of 212
Configuring Device (Access Point Mode)
Description
Shared authentication type the