D-Link DAP-1360 User Manual page 148

DAP-1360 Wireless N 300 Access Point & Router
User Manual
Parameter
Static IP Address
PPP debug
IP received
Figure 116. The page for creating a new connection. The Miscellaneous section.
Parameter
Enable RIP
NAT
Firewall
Ping
When all needed settings are configured, click the Save button.
Fill in the field if you want to use a static IP address to access the
Internet.
Select the checkbox if you want to log
debugging.
The IP address assigned by the ISP.
Miscellaneous
Select the checkbox to allow using RIP for this connection.
Select the checkbox if you want one WAN IP address to be used for
all computers of your LAN.
Select the checkbox to enable protection against ARP and DDoS
attacks.
Select the checkbox to allow the access point to answer ping
requests from the external network through this connection. For
security reasons, it is recommended not to select this checkbox.
Page 148 of 212
Configuring Device (Router Mode)
Description
all data on PPP connection
Description