Status; Network Statistics - D-Link DAP-1360 User Manual

DAP-1360 Wireless N 300 Access Point & Router
User Manual

Status

The pages of this section display data on the current state of the access point:

network statistics

•
IP addresses leased by the DHCP server
•
data on devices connected to the access point's network and its web-based interface.
•
Network Statistics
On the Status / Network statistics page, you can view statistics for all connections existing in
the system (LAN, WLAN). For each connection the following data are displayed: name and state
(when the connection is on, its name is highlighted in green, when the connection is off, its name is
highlighted in red), IP address and subnet mask, gateway (if the connection is established), MAC
address, MTU value, and volume of data received and transmitted (with increase of the volume the
units of measurement are changed automatically: byte, Kbyte, Mbyte, Gbyte).
Figure 32. The Status / Network statistics page.
Page 43 of 212
Configuring Device (Access Point Mode)