DAP-1360 Wireless N 300 Access Point & Router
User Manual
6. In the opened window, in the list of available wireless networks, select the wireless network
DAP-1360 and click the Connect button.
7. Wait for about 20-30 seconds. After the connection is established, the network icon will be
displayed as the signal level scale.
If you perform initial configuration of the access point via Wi-Fi connection, note that
!
immediately after changing the wireless default settings of the access point you will need
to reconfigure the wireless connection using the newly specified settings.
Figure 14. The list of available networks.
Page 25 of 212
Installation and Connection