D-Link DAP-1360 User Manual page 47

DAP-1360 Wireless N 300 Access Point & Router
User Manual
Parameter
Mode
DNS Relay
Start IP
End IP
Lease time
External DHCP server IP
When all needed settings are configured, click the Save button.
In the Static DHCP section, you can specify MAC address and IP address pairs (set a fixed IP
address in the local area network for a device with a certain MAC address). The access point
assigns IP addresses in accordance with the specified pairs only when the DHCP server is enabled
(in the DHCP server section, in the Mode drop-down list, the Enable value is selected).
An operating mode of the access point's DHCP server.
Enable: the access point assigns IP addresses to clients
automatically in accordance with the specified parameters. When
this value is selected, the Start IP, End IP, and the Lease time
fields are displayed on the page.
Disable: the access point's DHCP server is disabled, clients' IP
addresses are assigned manually.
Relay: an external DHCP server is used to assign IP addresses to
clients. When this value is selected, the External DHCP server IP
field is displayed on the page.
Select the checkbox so that the devices connected to the access point
obtain the address transmitted by the ISP as the DNS server address.
Deselect the checkbox so that the devices connected to the access
point obtain the address of the access point as the DNS server
address.
The start IP address of the address pool used by the DHCP server to
distribute IP addresses to clients.
The end IP address of the address pool used by the DHCP server to
distribute IP addresses to clients.
The lifetime of IP addresses leased by the DHCP server. At the end
of this period the leased IP address is revoked and can be distributed
to another device, unless the previous device has confirmed the need
to keep the address.
The IP address of the external DHCP server which assigns IP
addresses to the access point's clients.
Page 47 of 212
Configuring Device (Access Point Mode)
Description