D-Link DAP-1360 User Manual page 181

DAP-1360 Wireless N 300 Access Point & Router
User Manual
You can specify the following parameters:
Parameter
Destination network
Destination netmask
Gateway
Metric
Via Interface
Click the Save button.
To edit an existing route, click the relevant route link. On the opened page, change the needed
parameters and click the Save button.
To remove an existing route, click the relevant route link. On the opened page, click the Delete
button.
Figure 140. The page for adding a static route.
A destination network to which this route is assigned.
The destination network mask.
An IP address through which the destination network can be accessed.
The filed is displayed when the <Auto> value is selected from the Via
Interface drop-down list.
A metric for the route. The lower the value, the higher is the route
priority. Optional.
Select an interface through which the destination network can be
accessed from the drop-down list. If you have selected the <Auto>
value of this drop-down list, the access point itself sets the interface on
the basis of data on connected networks.
Page 181 of 212
Configuring Device (Router Mode)
Description