D-Link DAP-1360 User Manual page 165

DAP-1360 Wireless N 300 Access Point & Router
User Manual
Later you will be able to add wireless devices to the WLAN by pressing the WPS/RESET button of
the access point.
1. Select the PBC method in the software of the wireless device that you want to connect to the
access point's WLAN.
2. Click the relevant button in the software or press the WPS button on the cover of the
wireless device that you want to connect to the WLAN.
3. Press the WPS/RESET button of the access point and immediately release it.
After clicking the button the WPS LED blinks green. If the wireless device has been successfully
connected to the WLAN, the LED stops blinking and lights green for several minutes.
Page 165 of 212
Configuring Device (Router Mode)