D-Link DAP-1360 User Manual page 142

DAP-1360 Wireless N 300 Access Point & Router
User Manual
Parameter
Connect automatically
Username
Without authorization
Password
Password confirmation
VPN server address
Encryption
Authentication
algorithm
MTU
Keep Alive
Extra options
Dial on demand
VPN
Select the checkbox to enable auto-start of the connection upon the
boot-up of the access
A username (login) to access the Internet.
Select the checkbox if you don't need to enter a username and
password to access the Internet.
A password to access the Internet.
The confirmation of the entered password (to avoid mistypes).
The IP or URL address of the PPTP or L2TP authentication server.
Select a method of MPPE encryption.
No encrypt: MPPE encryption is not applied.
•
MPPE 40/128 bit: MPPE encryption with a 40-bit or 128-bit
•
key is applied.
MPPE 40 bit: MPPE encryption with a 40-bit key is applied.
•
MPPE 128 bit: MPPE encryption with a 128-bit key is
•
applied.
MPPE encryption can be applied only if the MS-CHAP, MS-
CHAP-V2, or AUTO value is selected from the Authentication
algorithm drop-down list.
Select a required authentication method from the drop-down list or
leave the AUTO value.
The maximum size of units transmitted by the interface.
Select the checkbox if you want the
connected to your ISP even when the connection has been inactive
for a specified period of time. When the checkbox is selected, the
LCP interval and LCP fails fields are available. Specify the
required values.
Advanced options of the pppd daemon which need to be specified
for this connection. Optional.
Select the checkbox if you want the
connection to the Internet on demand. In the Maximum idle time
field, specify a period of inactivity (in seconds) after which the
connection should be terminated.
Page 142 of 212
Configuring Device (Router Mode)
Description
point.
access point
access point
to keep you
to establish