Refresh Drive System; Mirror - Sony DynaView SSC-CR441 Operating Instructions Manual

Color video camera
Table of Contents

Advertisement

REFRESH DRIVE SYSTEM

Image distortion and misalignment of the
pan/tilt position may occur during extended
periods of use.
This system is to correct image distortion
and pan/tilt misalignment.
Video & PT drive refresh takes about 20
seconds to complete. Pan/tilt operations for
the camera are performed automatically
during the refresh operation.
After refresh is completed, the pan/tilt
position returns to that at the start of the
refresh operation.
Activate Refresh Drive
System Immediately
1
Press "95," and then hold the
PRESET key for 3 seconds to enter
the main menu screen.
2
Highlight :SYSTEM:, and then press
the OPEN key to enter the :SYSTEM:
menu.
3
Highlight :OTHERS:, and then press
the OPEN key to enter the :OTHERS:
menu.
During operation of this system, the
REFRESH DRIVE SYSTEM item is
blinking.
Set to Refresh Interval Time
If necessary, REFRESH DRIVE SYSTEM
can be activated on REFRESH INTERVAL
time after setting.
1
Press "95," and then hold the
PRESET key for 3 seconds to enter
the main menu screen.
2
Highlight :SYSTEM:, and then press
the OPEN key to enter the :SYSTEM:
menu.
3
Highlight :OTHERS:, and then press
the OPEN key to enter the :OTHERS:
menu.
4
Highlight REFRESH INTERVAL,
and then press the OPEN key to enter.
5
Move the joystick up/down to choose
interval time from OFF, 6H/12H/18H/
24H.
6
Press the OPEN key to confirm, or
press CLOSE to cancel selection and
exit from the menu screen.

MIRROR

When MIRROR function is set to ON, a
mirror image is shown on display. The
camera pans to the opposite direction
against the operation.
Set Mirror mode
1
Press "95," and then hold the
PRESET key for 3 seconds to enter
the main menu screen.
2
Highlight :SYSTEM:, and then press
the OPEN key to enter the :SYSTEM:
menu.
3
Highlight :OTHERS:, and then press
the OPEN key to enter the :OTHERS:
menu.
4
Highlight the MIRROR item, and then
press the OPEN key to enter.
5
Move the joystick up/down to choose
ON or OFF.
6
Press the OPEN key to confirm, or
press CLOSE to cancel selection and
exit from the menu screen.
47
SYSTEM

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dynaview ssc-cr481

Table of Contents