Configuring The System (System Setting Dialog); Setting Procedures Of System Setting; Tour Setting Tab - Sony Ipela XI's XIS-10DC User Manual

Wide area object detection system
Hide thumbs Also See for Ipela XI's XIS-10DC:
Table of Contents

Advertisement

Configuring the System
(System setting Dialog)
The System setting dialog opens when you select
System setting from the Tool menu in the main window.
Using this dialog, you can configure the whole camera
system.
There are four tabs in the System setting dialog. Use
the tab that suits your purpose.
Setting Procedures of System
Setting
1
Select System setting under Tool on the menu bar
of the main window.
The System setting dialog opens.
2
Select the tab and change the settings.
For each setting item on the tabs, see pages 44 to 46.
3
Click the Apply button to save the settings.
Click the Cancel button to close the dialog without
saving the settings.
44

Configuring the System (System setting Dialog)

Tour setting Tab

The Tour setting tab is used to set the details of the tour
mode of the zoom camera.
Exceptionally, Waiting time is a setting item that is
common to both the tour mode and the focus area mode.
Waiting time (sec.)
When the zoom camera tracks multiple moving objects,
it stays on one moving object for the period (seconds)
specified here, then moves to the next moving object.
"Track multiple moving objects." checkbox
Select the checkbox to track and shoot all the detected
moving objects equally if multiple moving objects are
detected.
Clear the checkbox to track only the moving object to
which the highest priority is given.
Maximum number of tours
Set the number of moving objects that the zoom camera
tracks. The moving objects are selected in the order of
priority.
Tip
If 1 is selected, the Track multiple moving objects
checkbox is cleared automatically.
Priority
Set the priority of moving objects that the zoom camera
tracks in tour mode.
Normal: Priority is given to the object that moved latest.
Upper area: Priority is given to the object that appears
most upward.
Lower area: Priority is given to the object that appears
most downward.
Large size: Priority is given to the largest size object.
Small size: Priority is given to the smallest size object.

Advertisement

Table of Contents
loading

Table of Contents