About The Manuals; System Overview; Application Variants - Sony SNC-HMX70 Installation Manual

About the Manuals

Safety Regulations (supplied)
The Safety Regulations describes the secure usage of
camera. Be sure to read it.
Installation Manual (this document)
This Installation Manual describes the names and
functions of parts and controls of the Network Camera,
gives connection examples and explains how to set up the
camera. Be sure to read the Installation Manual before
operating.
User's Guide/Application Guide (Web)
• How to control the camera via a web browser
• How to setup the camera
Operate the camera referring to the guide above after
having installed and connected the camera properly based
on the Installation manual.

System overview

SNC-HMX70 is a discreet, aesthetic, low-profile camera
for indoor use. The 12MP sensor operating at 30 fps
provides full panoramic surveillance with complete area
coverage, fine details and high speeds. The camera offers
full situational awareness and simultaneous E-PTZ views
in high resolution.
Unobtrusive design and easy installation
The low profile of the camera makes it exceedingly
suitable for installations where aesthetics are important. Its
unobtrusive nature allows it to fit in with architectural
features without detracting from the surroundings.
Museums, historic buildings or impeccably designed
interiors will all benefit from the discreet design.
The camera is easily mounted to any surface using a twist-
click mechanism via the supplied mounting ring. The high
quality IR corrected lens is factory focused and is not
restricted by a bubble, so installation is simplified and
sharpness is assured. The LED indicators, reset button and
SD card slot are easily accessed via two hinges at the front
of the camera. A complete set of indoor mounting
accessories, such as a surface mount box or a pendant pipe
mount, are available.
Power for the camera is supplied via a Power-over-
Ethernet compliant network cable connection. With this
configuration, only a single cable connection is required to
view, power, and control the camera.
Advantages of panoramic surveillance
Panoramic surveillance offers 360° coverage of the
designated area. Because our panoramic cameras cover the
full area, they provide complete situational awareness and
are ideally suited to following movement in one
continuous sweep.
The 360° version of the camera, when mounted centrally
on a ceiling, gives complete wall-to-wall coverage.

Application variants

The camera has a choice of application variants that set up
the camera for optimum performance in a specific
environment. Select the application variant best suited to
your installation. The application variant must be selected
before any other changes are made, as the camera reboots
automatically and resets the factory defaults when the
application variant is changed.
3