Sony DynaView SSC-CR441 Operating Instructions Manual page 30

Pan angle
Tilt angle
Main menu → :CAMERA SETUP:
menu
→ :OTHERS: menu
30
Camera Settings
Set Privacy Area Number
1
2
3
4
5
6
Set Privacy Mask Area Enable
This function enables the user to set the
PRIVACY MASK AREA display to ON or
OFF.
After the PRIVACY MASK AREA number
25° - 105°
is selected, the area display condition is
indicated.
1
2
3
Press "95," and then hold the
PRESET key for 3 seconds to enter
the main menu screen.
Highlight :CAMERA SETUP:, and
then press the OPEN key to enter the
:CAMERA SETUP: menu.
Highlight :OTHERS:, and then press
the OPEN key to enter the :OTHERS:
menu.
Highlight PRIVACY MASK AREA,
and then press the OPEN key.
Move the joystick up/down to select
the PRIVACY MASK AREA number.
Press the OPEN key to confirm, or
press CLOSE to cancel selection and
exit from the menu screen.
Press "95," and then hold the
PRESET key for 3 seconds to enter
the main menu screen.
Highlight :CAMERA SETUP:, and
then press the OPEN key to enter the
:CAMERA SETUP: menu.
Highlight :OTHERS:, and then press
the OPEN key to enter the :OTHERS:
menu.