How To Install - Sony DynaView SSC-CR441 Operating Instructions Manual

Fixing Screws
Required screws (not supplied) vary in
accordance with the location or material of
the installation.
For steel: Fix with M4 screws and nuts.
For wood: Fix with tapping screws
(nominal diameter 4). A material thickness
of 15 mm or more is necessary.
For a concrete wall: Fix with dry bit or plug
bolts.
For a junction box: Fix with screws that
accommodate the screw holes in the
junction box.
WARNING
Use the appropriate screws in accordance
with the condition and material of the
location site. Otherwise, the ceiling unit
may fall and cause serious injury.

How to Install

1
Put the built-in wire rope on the hook
in the ceiling bracket.
Align the triangular f mark with
the front side of the camera when
using a junction box.
Ceiling bracket
Ceiling
Hook
2
Connect the cables.
Note
Although you can connect the cables while
the camera unit is hanging from the ceiling
bracket with the help of the rope, be sure not
to put additional pressure on the unit.
3
Align the triangular f mark on the
camera with the diamond-shaped
mark on the ceiling bracket, and then
attach the camera unit into the bracket.
Built-in wire rope
◊
15
Mount Method