Table of Contents
Advertisement
TITLE
Main menu → :PRESET SETUP:
menu
→ :TITLE: menu
Input Preset Title
A preset title of up to 20 characters can be
set and displayed at the top or bottom of the
screen.
Choose the Preset Position
1
Press "95," and then hold the
PRESET key for 3 seconds to enter
the main menu screen.
2
Highlight :PRESET SETUP:, and
then press the OPEN key to enter the
:PRESET SETUP: menu.
3
Highlight :TITLE:, and then press the
OPEN key to enter the :TITLE:
menu.
4
Highlight PRESET POSITION, and
then press the OPEN key to enter.
5
Move the joystick up/down to choose
the desired preset number.
6
Press the OPEN key to confirm, or
press CLOSE to cancel selection and
exit from the menu screen.
Set the Preset Title
1
Highlight TITLE INPUT, and then
press the OPEN key to enter.
2
Move the joystick up/down to select
the desired character, and then move
the joystick left/right to highlight the
desired position.
3
Press the OPEN key to confirm, or
press CLOSE to cancel selection and
exit from the menu screen.
Set the Preset Title Position
The preset TITLE POSITION can be set the
top (UP) or bottom (DOWN) of the screen.
PRESET MOTION
Main menu → :PRESET SETUP:
menu
→ :MOTION: menu
The detection mode can be set for each
preset position number 1 to 10:
Up to four detection areas can be set in
MOTION AREA SETUP item. In this
setup item, each area is identified by
color, namely area 1 is red, area 2 is blue,
area 3 is yellow, and area 4 is green. The
status ON or OFF can be chosen for each
area detection.
The LEVEL item can be set to HI, MID
or LOW. The LEVEL determines the
39
PRESET SETUP
Advertisement
Table of Contents
