Configuring The Pan, Tilt And Zoom (Ptz) Dome Settings; Turning The Pan And Tilt Speed Range (Pass) On And Off; Turning The Auto Pivot On Or Off; Changing The Manual Pan And Tilt Speed - Honeywell ACUIX Installation And Configuration Manual

Configuration

Configuring the Pan, Tilt and Zoom (PTZ) Dome Settings

Task/Action (with Default)

Turning the Pan and Tilt Speed Range (PASS) ON and OFF

Select 3 Control Options

Turning the Auto Pivot ON or OFF

Select 3 Control Options

Changing the Manual Pan and Tilt Speed

Select 3 Control Options

Speed 120°/sec, 240°/sec, or 480°/sec (default).
78
Note Remember you access the OSD by pressing 90
 
1 PASS ON (default) or OFF.
 
2 Auto Pivot ON or OFF (default).

4 Set Pan and Tilt Options
Notes
PASS is a function of the lens zoom
angle. The maximum pan and tilt speeds
are reduced when the lens zooms in. For
example, the pan and tilt functions are
slow when the camera is set at 12X zoom.
The higher the zoom magnification, the
slower the speed.
Track people passing directly underneath
the dome. The dome automatically turns
180 when it reaches its lower limit. It
continues to tilt up as long as the control
tilt function remains in the down position.
When the dome reaches its tilt up limit, it
returns to normal operation.

1 Manual The maximum tilt speed is half of the
maximum pan speed.

Preset.